Zilker Neighborhood Gardens

Commentary by a National Wildlife Steward who helps Zilker neighbors establish native plant gardens

Tag Archives: tools

Photos: Killing Grass with the Newspaper Method

As a followup to my post about how to kill grass, I wanted to show some pictures of the process. I have done this twice – first in Minnesota where I lived for 7 years (and which are reflected in the pictures below) and second, here in Austin just in December, 2010. I used this method to setup some planting beds in my backyard. I have planted a few things there but have not yet finished.

Step 1: Identify the area where you want to make your planting bed. I chose this area where I had already planted a flowering crabapple tree. You can design your bed using a garden hose to see it before you destroy it!

Pictures of grass area that will be killed

Step 2: Layout your newspapers in 10 sheet thickness, spray with water and put 6-8″ of mulch on top. See the black hose in picture below to see how I outlined my bed before laying out newspaper.

Picture of newspaper and mulch on top of grass

Step 3: Wait for 1-2 months for the grass to die.

Picture of planting bed with mulch
Step 4: Plant your plants. Just dig a hole through the newspaper, remove any grass if it still exists, and plant your plant. You may have to remove some of your mulch because it is so deep.

Planting plants in bedAll done!

Bed planted with plants

Step 5: Let it grow. Here’s what my garden looks like about 5 years after I planted it. I have since moved, but I was back in Mpls and took a picture of my beloved garden last May, 2010.

Picture of garden after 5 years

Gardens with native plants absorb much more water run-off than the grass they replace. This is good because it reduces storm run-off. Plus, I think this garden looks a million times more interesting than the former grass that was there.

How to Kill Grass

If you are going to do some gardening, you might need to get rid of some grass to be able to create a nice bed for your new plants. There are several ways to do this that (a) do not use chemicals, (b) do not cost much money, and (c) do not require back-breaking work (well, maybe some – but we all need the exercise anyway).

My favorite is the newspaper method. First, you start saving your newspapers – but not the glossy pages. Design your planting bed – you can draw it out using garden hoses, flour, and/or landscape paint. Once you like your design, pick a day that is not very windy to get to work. Lay out your newspaper on your grass – about 10 sheets in thickness over the whole area of grass. Overlap the edges slightly so that no grass pokes out. I like to wet down the newspaper a bit when I have them in the right spot – especially if it is at all windy as those sheets will start flying. Once your newspaper is down, you dump about 6-8″ of mulch on top. Then you wait about 1-2 months. If you are dying to plant, just poke a hole through your mulch and newspaper and dig a hole and plant your plant. You may get a few grass stragglers coming up, but just pull any out that you see. After 2 months, almost all the grass will be gone. I used this method in MN where I used to live, and it worked like a charm. I also recently used this method in my backyard. On hearty St. Augustine, it might take a bit longer to kill the grass but it will with time. I did buy 5 cubic yards of mulch from the Natural Gardener (about $200 delivered) and had to move it back via wheelbarrow (some work), but it wasn’t that bad. Natural Gardener has a formula to figure out how much mulch you need. I just measured the beds I planned on making and did a little math. Over time, the newspaper disintegrates into the soil. Remember, you can add shredded newspaper to your compost anytime you need “browns” to balance it out. Of course, if you can coordinate your new planting bed creation with the Christmas tree mulch the City of Austin gives away in January, then you’d save some money!

Another way is to kill grass using clear plastic. However, contrary to what you think, you do not use black plastic. Instead, you use clear plastic in order to solarize the grass (essentially, that means burn it up). The plastic also needs to be somewhat thick – perhaps 6mm. The other key to solarizing the area is that you should do this in the summer when the sun is hottest and most direct. In addition, you need to keep the grass area slightly moist under the plastic. So, occasionally you need to spray some water under there. I know that you are surprised because I was surprised when one of the presenters in my training told us that clear plastic was the appropriate method. You should find a way to keep all the edges of your plastic down (logs, rocks etc.) in order to not let “cool” air within it. The experts say this approach is best, and that clear plastic + moistness creates more heat deeper into the soil under the plastic. Of course, you can use black plastic, but it will not work as quickly as the clear plastic.

The third way, which is more backbreaking, is to just cut out your sod. You could use a flat shovel and cut out your sod (if you keep enough soil on the bottom, you could use your sod in another location on your property). You could also rent a sod-cutter and use the machine to cut the sod out. I have never used these machines, but I’ve seen them used on gardening shows on TV! Neither of these approaches are easy on the back / body. If you cut your sod, you might want to use a pitchfork or twirlyfork to mix up your soil afterwards. It is always good to throw in some compost to prep your beds. Remember – always call before your dig!

Call Before You Dig is a free service that locates your underground utilities. Use this service any time you plan to excavate at your home or business. Call toll-free (800) DIG-TESS (344-8377).

The utilities will mark any underground cables/lines so you can be careful round those areas. It is also helpful to know where your sprinkler lines are, if you have irrigation, so you don’t poke your pipes and cause a leak.

The last way is to use bad, bad chemicals. I am not a fan of this, so I won’t mention it. But think: if you are intending to build a beautiful garden of wonderful natives, do you really want to put them in the ground where you just sprayed chemicals? It’s not a very “green” choice, and the NWF Habitat Stewardship aims to promote greener ways for gardening.

Winter weather here and temp is dropping …

Real winter weather has arrived. Did you enjoy the 70 and 80s this weekend? I know I did while planting some plants late into Saturday night. It was such a nice day!

Well today’s another day and we’re facing freezing weather for the next few days. So … you know the drill:

  • Bring in your delicate plants.
  • Cover other plants with blankets, sheets, or special plant fabrics. Make sure you secure them as much as possible since it is also going to be windy.
  • Unhook your hoses from outside faucets and make sure all the water is out of the hoses (otherwise, it will freeze and burst through your hose, possibly).
  • Wrap your outside faucets with insulation, and open your faucet so it drips about five drips per minute. Do this when the weather is less than 28 degrees for more than 4 hours, and let it drip until the temperature raises above 30.
  • Know where your water shut-off valves. If you can shut off the water to just your outside faucets, you could do that, then open the valve so all water comes out & keep it open in case there’s any water in there, it has room to expand.

There’s a more expansive list of pointers for freezing weather at KXAN. Good luck!

%d bloggers like this: